ZVA Automatic AdBlue™ Magnetic Nozzle
Availability: In Stock
Ex VAT: £35.28
Delivery
| Order total | Delivery |
| Under £30.00 (+VAT) | £20.00 |
| Over £30.00 (+VAT) | £15.00 |
Add to Compare
The ZVA Automatic AdBlue™ Magnetic Nozzle is designed for use in conjunction with the ELAFIX 40 adaptor in order to prevent the costly miss-filling of AdBlue into the diesel tank. This magnetic spout ZVA nozzle will only allow fluid to pass once it has been magnetically opened by the ELAFIX AdBlue magnetic adaptor fitted within the vehicle filler neck. Therefore, by using this AdBlue nozzle you cannot physically dispense into the wrong tank, as the diesel fill point will not contain a magnet.
The miss-filling of AdBlue™ into the diesel tank is a common issue and will be costly for the vehicle owner to put right. AdBlue™ is not compatible with many materials and miss-filling can corrode the pipework and components of a fuel system – resulting in thousands of pounds of damage, as well as having to pay for the removal of AdBlue™ from the tank.
This automatic AdBlue™ nozzle is a well-known branded ZVA AdBlue™ dispensing option approved for use in heavy use, resale environments, such as those seen at the forecourt and service station. Due to these approvals it carries a higher price that than alternative AdBlue nozzle models.
Only for use with AdBlue pumps - not suitable for gravity fed installations.
Features of the ZVA AdBlue™ Dispensing Nozzle:
- Automatic AdBlue™ Nozzle
- Magnetic spout for preventing miss-filling
- Maximum flow rate: 40ltr Per Min
- Suitable for urea and water
- Supplied with ¾” Hose Barb Swivel
- Approved for use in resale systems
- Must be used with ELAFIX 40 adaptor
| Code | Product | Description | Price (excl VAT) | |
|---|---|---|---|---|
| F00619040 | ZVA Automatic Magnetic AdBlue™ Nozzle | Max Flow Rate (lpm) - 40 Max Pressure (Bar) - 3.5 Spout OD (mm) - 19 Inlet - 3/4" Hose Barb Swivel Automatic AdBlue and Water |
£783.36 | |
| F15165000 | Elafix 40 AdBlue™ Magnetic Tank Adaptor | 19mm OD Compatible to ISO22241-3 Working Temp: -20°C to +85°C Weight: 65g For use with AdBlue magnetic nozzles |
£35.28 |
Accessories
| Code | Accessory | Price (excl VAT) | |
|---|---|---|---|
| F18400000 | Nozzle Override Magnetic Adaptor Fits over a magnetic spout to allow it to dispense when not in contact with a vehicle tank magnetic adaptor e.g. when filling a smaller container or if you have some vehicles with a tank adaptor and some without. |
£22.32 |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Ask a question about ZVA Automatic AdBlue™ Magnetic Nozzle
